Skip to content
Home/Answers/Getting started
CANADA DRAIN / Getting started

Getting started: Chemical vs Mechanical Clearing

Getting started: Compare effects and risks to pipe walls, seals and odour.

Updated 2026-11-20About 3 min
Affiliate disclosure: some outbound links go to commercial partners. We currently pass no tracking parameters, so we earn no commission from them; if that changes, this page will say so.
Quick answer

Getting started: Compare effects and risks to pipe walls, seals and odour. Start depends on odour type/drain layout.

Why it matters

Start with Odour, Layout; the cost and outcome of getting started follow from those.

Step by step

  1. Locate the smell by fixture.
  2. Check whether the trap is dry (most common).
  3. Check for a blocked vent (gurgling at other fixtures).
  4. Only then look at slope and backwater valves.

Common mistakes

  • Pouring chemicals first.
  • Replacing a trap with a straight pipe.
  • Sealing a vent.
  • Ignoring the basement floor drain.

Checklist

  • Smell, trap, vent, slope, backwater.
  • Flashlight.
  • Bucket.
  • Two quotes.

Who it is for

If you are deciding between two models, put Odour. and Layout. in one table and compare on the same basis.

Key facts

  • Odour.
  • Layout.
  • Slope.

FAQ

Getting started: Chemical vs Mechanical Clearing

Getting started: Compare effects and risks to pipe walls, seals and odour. Start depends on odour type/drain layout.

What should I check before buying a Getting started?

Start depends on odour type/drain layout. Key checks: Odour.; Layout..

Is a Getting started worth it?

Depends on use, budget and upkeep; a Getting started is not automatically better because it costs more.

Source: National Plumbing Code of Canada

Top picks

ProductBest forPrice
Dry Trap InsertTrap insertLowCompare options
Drain AugerAugerLowCompare options
Enzyme CleanerEnzymeLowCompare options

Sources